Index Contact Site map
TURBINE EXPANDERS, OIL AND GAS EQUIPMENT
| English

TURBO GENERATOR PLANT WITH POWER OF 300 kW

The turbo generator plant is intended for electric power generation due to the gas excessive pressure power. The plant belongs to the energy-saving equipment. It converts the released potential of the technological process excessive gas pressure into the electric power. In case of technological necessity the plant can operate in the mode of simultaneous generation of electric power with cold obtaining at the temperature level of minus 20 minus 30 with cold generation of about 300 kW. The turbine, generator and magnetic bearings operate in the natural gas medium and are located in the common casing. The expander-generator is located outdoors under the shed, the automatic control system cabinet and the generator and magnetic bearing control equipment are located in the control room.

● Absence of the oil system excludes pollution of with oil;

● Technology of the magnetic bearings provides the service life of minimum 20 years;

● Zero emission of hazardous substances from turbo generator;

● Low level of vibration and noise;

● The turbo generator is serviceable due to the presence of the remote control and diagnostics system.

Apply international standards ANSI, API, ASME, DIN, ISO, GOST, DSTU.

Block diagram of turbogenerator plant

1 electro generator stator 2 electro generator rotor 3 turbine impeller 4 thrust magnetic bearing MB 5 support magnetic bearing MB 6 expander-generator plant casing 7 sealed lead-in PR voltage variable speed drive ACS automatic control system MBCC magnetic bearing control system AV1, AV2 adjusting valve (rotation frequency maintenance) SV1, SV2 - shutoff valve

   

© 2008 Turbogaz PrJSC
61003, Kharkov, Trojtskyj lane, 6/4
Tel./Fax:+38 (057) 715-16-09, 715-16-21, 715-16-13
turbogaz@ukr.net
oao@turbogaz.kharkov-ua.com
contacts